Fully transportable – lightweight design can be used virtually anywhere

Trouble-free operation – easy to operate hydraulics provide up to 4 tons of thrust, providing instant results.

Cost effective – return on your investment can occur with your first salvaged roll!

Expansion is approximately 1/4 inch above nominal core.

Mark II is ideal for roll diameters up to 1,025 mm diameter and 902 mm width.

TERMS :  Net 30

PART #:  MII-27L700066

DELIVERY:  One week from receipt of order

F.O.B.:   Anderson IN  S. & H. costs added at time of shipment.

As with all products we sell, this unit is   warranted to perform as designed without defect in material or workmanship for one (1) year.

MARK II ROLL CORE SAVER

Provides fast results, and can be used virtually anywhere, without any special instruction.

The Mark II roll saver has a hydraulic pump located below the handle, transmitting up to 9,000 psi
(621 bar) to the cast steel jaws. The closed jaws are positioned in the crushed roll. A few strokes on
the pump handle will force the jaws open. To close the jaws, simply open the release valve. Repeating
this process several times allows the roll saver to move further into the roll. Once inside the roll, the
operator must rotate the roll saver to push out in all directions, especially in the direction of the maximum crush. The Mark II is designed for fiber cores and is not recommended for steel or steel tipped cores.
Also, film rolls constricted or crushed by film tension may be beyond repair.

Features:

• Fully transportable – lightweight design can be used virtually anywhere.
• Trouble-free operation – easy to operate hydraulics provide up to 4 tons of thrust,
  giving you fast results.
• Restores 3″ cores.
• Cost effective – return on your investment can occur with your first salvaged roll. Ease of use

Technical specification:

• For 2 3/4” (70mm) to 3” (76mm) O.D.cores
• Maximum 10” (250mm)
• 19 lbs. (9kg)
• 9,000 psi (621 bar); hydraulic ram located between jaws develops a thrust of 4 tons

Recommended for 45” diameter rolls up to 36” wide